Educational guide
IDENTIFYING DATA 2022_23
Subject AIRCRAFT AND SPACECRAFT DEVELOPMENT. Code 00713014
Study programme
0713 - MASTER UNIV. EN INGENIERIA AERONAUTICA
Descriptors Credit. Type Year Period
6 Compulsory Second First
Language
Castellano
Ingles
Prerequisites
Department ING.MECANICA,INFORMAT.AEROESP.
Coordinador
GARCIA GUTIERREZ , ADRIAN
E-mail agarcg@unileon.es
bgonza@unileon.es
Lecturers
GARCIA GUTIERREZ , ADRIAN
GONZALEZ ALLER , BENITO
Web http://
General description
Tribunales de Revisión
Tribunal titular
Cargo Departamento Profesor
Presidente ING.MECANICA,INFORMAT.AEROESP. PEREZ GARCIA , HILDE
Secretario ING.MECANICA,INFORMAT.AEROESP. DOMINGUEZ FERNANDEZ , DIEGO
Vocal ING.MECANICA,INFORMAT.AEROESP. GONZALO DE GRADO , JESUS
Tribunal suplente
Cargo Departamento Profesor
Presidente ING.MECANICA,INFORMAT.AEROESP. BARREIRO GARCIA , JOAQUIN
Secretario ING.MECANICA,INFORMAT.AEROESP. MARTINEZ PELLITERO , SUSANA
Vocal ING.MECANICA,INFORMAT.AEROESP. RODRIGUEZ MATEOS , PABLO

Competencies
Type A Code Competences Specific
  A13176
  A13177
  A13178
  A13179
  A13180
  A13181
  A13182
  A13184
  A13185
  A13186
  A13187
  A13190
  A13213
  A13214
  A13215
  A13216
  A13217
  A13218
  A13219
  A13220
  A13228
Type B Code Competences Transversal
  B3011
  B3012
  B3013
  B3014
  B3015
  B3016
  B3017
  B3019
  B3020
  B3021
  B3022
  B3025
  B3048
  B3049
  B3050
  B3051
  B3052
  B3053
  B3054
  B3055
  B3063
Type C Code Competences Nuclear
  C1
  C2
  C3
  C4
  C5

Learning aims
Competences
A13176
A13177
A13178
A13179
A13180
A13181
A13182
A13184
A13185
A13186
A13187
A13190
A13213
A13214
A13215
A13216
A13217
A13218
A13219
A13220
A13228
B3011
B3012
B3013
B3014
B3015
B3016
B3017
B3019
B3020
B3021
B3022
B3025
B3048
B3049
B3050
B3051
B3052
B3053
B3054
B3055
B3063
C1
C2
C3
C4
C5

Contents
Topic Sub-topic
Bloque I: INTRODUCTION Tema 1: INTRODUCTION TO AEROSPACE SYSTEMS ENGINEERING
Introduction to conceptual, preliminary and detailed design. Functional analysis and design review
Bloque II: AIRCRAFT Tema 1: PROJECT SPECIFICATION AND MANAGEMENT
Regulation and customer requirements. Phases of the project

Tema 2: AIRCRAFT DESIGN
Conceptual design. Initial sizing, analysis of airplane weights, cost study

Tema 3: AERODYNAMIC ANALYSIS
Study of profiles and finite wings. Airplane wing and tail design

Tema 4: STRUCTURAL ANALYSIS
Study of the loads that act on the aircraft, fatigue and the different structural components

Tema 5: FLIGHT SIMULATOR
Characterization of the stability and control of the aircraft

Tema 6: CONSTRUCTION AND INTEGRATION
Study of the manufacturing and integration processes, as well as the applicable regulations

Tema 7: AIRWORTHINESS, CERTIFICATION AND TESTING
Study of the certification processes, the maintenance of airworthiness and the different types of tests
Bloque III: SPACECRAFT Tema 1: PROJECT SPECIFICATION AND MANAGEMENT
Phases of a space project and definition of requirements.

Tema 2: ORBITAL PROFILE AND SIMULATION
Study of the space environment and study of the attitude of the satellite.

Tema 3: DESIGN OF A SATELLITE
Study of the main subsystems. Preliminary design. Payloads.

Tema 4: STRUCTURAL ANALYSIS
Characterization of shock loads and transitory analysis.

Tema 5: THERMAL ANALYSIS
Study of heat transfer processes: conduction, convection and radiation. Design of the
thermal control subsystem.

Tema 6: CONSTRUCTION AND INTEGRATION
Introduction to QA.

Tema 7: LAUNCH, CERTIFICATION AND TESTING REQUIREMENTS
Study of the verification and validation processes.

Planning
Methodologies  ::  Tests
  Class hours Hours outside the classroom Total hours
PBL (Problem Based Learning) 33 30 63
 
Personal tuition 2 0 2
 
Lecture 21 42 63
 
Mixed tests 4 18 22
 
(*)The information in the planning table is for guidance only and does not take into account the heterogeneity of the students.

Methodologies
Methodologies   ::  
  Description
PBL (Problem Based Learning)
Personal tuition
Lecture

Personalized attention
 
Lecture
PBL (Problem Based Learning)
Personal tuition
Description

Assessment
  Description Qualification
Mixed tests 100%
 
Other comments and second call

Sources of information
Access to Recommended Bibliography in the Catalog ULE

Basic AIAA, AIAA Journal of Aircraft, AIAA, Actual
Daniel Raymer, Aircraft Design: A conceptual aproach, AIAA Education Series , -
Mohammad H. Sadraey , AIRCRAFT DESIGN: A Systems Engineering Approach , Wiley, 2013
J. Roskam, Airplane Flight Dynamics and Automatic Flight Controls. Parts III-VIII , Prentice-Hall Englewood Cliffs, New Jersey, 1982
NASA CubeSat Launch Initiative , CubeSat101 - Basic Concepts and Processes for First-Time CubeSat Developers, NASA CubeSat Launch Initiative For Public Release , 2017
Snorri Gudmundsson, General Aviation Aircraft Design: Applied Methods And Procedures, Embry-Riddle Aeronautical University - Elsevier, 2014
Wertz and Larson, Space Mission Analysis and Design, Space Technology Library, 1999
J.R.Wertz, Space Mission Engineering: The New Smad, Mcgraw-Hill , 2011
E. Torenbeek, Synthesis of Subsonic Airplane Design, Delft University Press/Kluwer Academic Publishers, 1982

Complementary C. Cuervo-Rejado , Aeronavegabilidad y Certificación de Aeronaves, Thomson/Paraninfo , 2010


Recommendations


Subjects that it is recommended to have taken before
AIRFRAME CALCULUS / 00710029
SATELLITES / 00710037